|
Black Mountain Hemp Insulation has exceptional insulation properties due to a combination of low thermal conductivity and high thermal mass - reducing internal temperature fluctuations and enhancing thermal comfort.
Due to the strength of the fibre the product has good resistance to compression and is a semi rigid structure which resists slumping and compaction.
The product has been designed to match and surpass the Part L Building Standards with reference to Thermal, Fire, Mould Resistance and Structural performance.
Due to its strength and rigidity, Black Mountain Hemp insulation is ideally suited for use in timber frame constructions, warm lofts, internal walls and inter-floor applications, as well as for breathable wall construction. Hemp insulation is not only breathable but also able to absorb, retain and release moisture without affecting its thermal properties.
Hemp is not attacked by vermin or other pests. The hemp fibre selected by Black Mountain is grown without the use of pesticides, herbicides or forced irrigation.
Specification
Black Mountain Hemp Insulation has a thermal conductivity of 0.04 W/MK, density of 30kg/m3. It complies with Euro Class 'E' fire test and Building Regulations Part L BS:5803-4.
Sizes
| Batts | Pieces per pack | 380mm wide | 580mm wide |
| 50mm | 12 | 5.47m2 per pack | 8.35m2 per pack |
| 75mm | 8 | 3.65m2 " | 5.57m2 " |
| 100mm | 6 | 2.74m2 " | 4.18m2 " |
All batts are 1.2 metres long.
Older properties very rarely have 400mm or 600mm rafter centres. Black Mountain can produce special widths, which reduces wastage and fitting time thus reducing total cost, often achieving a lower installed cost than man-made insulation.
Minimum order quantities apply to special widths.
Prices
50mm/75mm/100mm thick x 380mm wide - all £21.00 per pack
50mm/75mm/100mm thick x 580mm wide - all £32.50 per pack
All prices plus VAT and delivery.
|
The Big Picture